ZHRUI 60W Miniature Metal Lathe for DIY Model Making Enhanced 50mm Center Height

ZHRUI 60W Miniature Metal Lathe for DIY Model Making Enhanced 50mm Center Height. Hi-power motor is adopted with all drive axes, maximum speed up to 12,000RPM.

Input voltage/Current /Power:12V/5A /60W. Input Voltage of Switch Power Supply: 110V - 240V.

The largest diameter of processed material: 50 mm. The length of processed material: 150 mm. The size of chuck and collet is from 1 to 6 mm. X-axis slider travels: 150 mm. Center height-50 mm, center distance- 150 mm. Machine size: 310 mm100 mm175 mm. Measures of base plate: 315 mm200 mm17 mm. The motor case and head stock of all-metal machine tools is jointed completely. Main parts configure with metal structure and no plastic components in the whole machine body, such as motor box, head stock, hand wheels, slider, 3-jaw chunk/4-jaw chunk, turning tools clamping jaw, machine bed, gear, side cover, working table, connection piece, tail stock, counter shaft, drive belt cover etc. Fan built-in motor is featured with Ultra-quiet & high rotary speed. That's special customized option for motor cooling & effective work. The most parts of machine tools are dealt with two surface treatment methods of electroplating and ink-jet anodized to make appearance more cleaning & glorious, lasting rust-proof. Machine bed is made of Europe standard T-type aluminum material, moving more precisely &smoothly.

5.3C quality assured transformers have the function of over-current, over-voltage and over-heat protection. To improve the stability and service life, the connection block be fixed by square nuts, which avoid screw loosing after long time vibration. The connection piece adopts dovetail structure, which matches with each slot of the machine tools parts to enhance its performance and accuracy.

Children-proof design & safe fillet processing technology, they are all to prevent metal parts from scratching the skin. Versatile application: The turning tools of mini metal lathe are made of steel material, which can be perfectly used to process the soft metal (gold, silver, copper & aluminum), acrylic and engineering plastics etc. By adding some loose-preventing nuts on the side of small& big slider, not only avoid the gap after excessive vibration, but also improve the processing accuracy. The chuck is fixed by a hexagon nut to increase the tightness of the clamping tools (such as drill bits, cutters, wood-turning lathe driver).

The whole hand wheel is made of super alloy material, which be assembled in X, Z axis and tailstock. Featuring with 0.02 mm scale line, the hand wheel increases the precision when processing. (The scale lines are molded at one time, aren't sticky label).

13.3/4 semi-circular structure designed hand wheel, that's quite convenient for dismantling connection blocks. There are three parallel dovetail slots available on the big slider, which facilitate the movement of mini lathe tools and installment of the holders and the cutlery.

Adding intermediate pieces under motor box, tail stock and lathe tools clamping jaw, which enlarge the machining rotary diameter & practical usage. 16.3-jaw chuck can be used to clamp the material at a maximum diameter of 50 mm, four-jaw single-action chucks is available. It is perfect optional choice for irregular shape (such as square, elliptical, hexagonal material), also expand the effective work area. Locate the center of work piece by center finder. Use 2 iron rods to unscrew the three-jaw chuck and place one end of the work piece into middle of the chuck. Tighten the chuck and rotate the hand wheel at the other end to push the live center into the center of the workpiece tightly. And then, tighten the tailstock and fix the screw, so as to fix the work piece.

Turn on the lathe, move the small slider in the Y axis direction to control the feed, move the big slider in the X axis direction to control the processing position. If the work pieces are not concentric and have imaginary circles, remove the outer imaginary circle.

Tool setting: before processing, insert the turning tool into the turning tool clamping jaw and move the slider to adjust the turning tool into the same horizontal line with the live center& middle of three jaw chunk. If processing wood, the cutting amount should be less than 2mm per time. If processing aluminum or copper, the cutting amount should be less than 1mm per time. Otherwise, the motor will stop working and start self-protection. The below images are new package more safe&durable for long-distance transportation.

Outside vacuum plastic bag+Corrugated paper box, inner PE foam packing. Question 1: What's the usage of ZR miniature machine tools? The miniature machine tools have the same features as big industrial machines, the only differences are their size and the 12 V drive. You can use it for DIY model making and some little crafts, which is also able to process hard wood, soft metal, alloy etc...

Based on its feature of modularity & child friendly use, that's ideal& creative product to inspire children hand-on skill? Question 2: Is it easy to assemble and operate the miniature machine tools?

What we provided is the installed complete machine tools, meanwhile, there is full set of English manual & guide videos to show you how to use it smoothly. Question 3 : How about the after sales service? Please Checkout & Pay immediately. Once you have all items on your cart, you can then proceed to checkout.

ZHRUI is not liable for lost, stolen or damaged packages. We reserve the right to update the policies above without any prior notice. Notice Except for the express warranties provided herein, ZHRUI makes no express or implied warranties of any kind whatsoever with respect to the product in terms of fitness, particular purpose, design, condition, quality, or performance of the product.