Mini Metal Lathe 8×16 Inch/Metric Benchtop Lathe Electronic Gearless Auto Chan

We have Various models imperial and metric lathes. Miniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies. For example, turning inside and outside cylindrical surface, cone surface, ring groove and forming turning surface, turning end face and all kinds of commonly used metric thread and so on. Tool rest plate max stroke.

Switching between metric and imperial is no longer required by changing gears. Only need to operate throgh the panel, save a lot of time. Lower noise, no longer need to change gears to adjust the processing thread.

Only need to operate on the panel, processing efficiency greatly improbed. Self-acting feed design solves many disadvantages of manual feeding can set self-acting feed speed through the panel, improve accuracy and efficiency. Observe the rotation speed in real time.

The adjustable 4-way tool post on the can easy change your cutting tools. The 8 screws better grip the tool and finish the machining efficiently. Three / Four Jaws Chuck.

Equipped with three jaw and four jaw chuck, choose which chuck to use according to the situation. The tailstock with a maximum center distance of 31.5 in at the far right.

With the MT#2 taper in tailstock spindle. Control panel above the design of forward and reverse switch and start & emergency stop switch, easy to operate. Precise metric scale are provided on the saddle handle, the tailstock handle and the movable center, allowing for more accurate and professional work. The mini metal lathe is suitable for many processing tasks including turning, drilling, threa ding and cutting and so on. Switching between imperial and metric is no longer required by changeing gears.

Only operate through the panel can get it. Low noise, no longer need to change gears to adjust the processing thread.

Only need to operate on the panel. Length of center:15.75"(400mm), Swing Over Bed:8.27"(210mm), Rotary diameter of tool rest:5.51"(140mm), Diameter of chuck:4.92"(125mm), Width of lathe bed:3.94(100mm), Spindle rotation speed:50-2500rpm, Power:1100W Brushless Motor. Equipped with 1100W brushless motor. The spindle rotation speed is divided into two adjustable gears, respectively 50-1250rpm and 1250 -2500rpm. The panel can observe the rotation speed in real time, which is flexible and convenient.

Three ways to start turning: manual start, automatic start, delay automatic start. Control panel set parameters after saving and start, can realize reciprocating turning function and turning thread. Telescopic sets with scale, you can intuitively see the length of the telescopic handle scale, precise scaling can be digitally standardized or adjusted by lateral movement. Used for turning, facing, drilling, boring and turning thread.