Micro Lathe Milling Attachment for the SIEG C2/SC2/C3/CX704/Grizzly G8688

Cast iron and steel with moulded handwheel. Dial graduations in 0.025 mm, 60 divisions. The mini lathe milling attachment replaces the compound rest on the mini lathe. The vise opening is 1.9. The width of the vise is 2.6" and the depth is 1.4".

The travel is 3.6. The dial is graduated in 0.025 mm (approximately 0.001") and there are 60 divisions, so the advance is 1.5 mm (0.059") per revolution. This lathe milling machine attachment should work on most any lathe with 7 or greater swing with the addition of a shop-made adapter block to adapt the bolt pattern to fit the lathe.

SIEG C2/SC2/C3, OTMT C2, Craftex CX704, Grizzly G8688, Mr. Meister Compact 9/ JET BD-6/BD-X7/BD-7.

MANROD MR-300/MR-301, SOGI M1-250/M1-350S, Baumr-AG BMLAT-05/BMLAT-07.